ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า

บอร์ด ESP32-S3 1.8inch AMOLED Touch Display พร้อมไมค์และลำโพง

 

Features

ESP32-S3-Touch-AMOLED-1.8 is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.8inch AMOLED display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC, low power audio codec, and so on, which makes it easy for you to develop and integrate it into the products quickly.

Key features include:

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory
  • Type-C connector, improving device compatibility, easier to use
  • Onboard 1.8inch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color
  • Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.
  • Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery
  • Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, optional for 3.7V Lithium battery
  • Reserved pads of 7 × GPIO, 1 × I2C, 1 × UART, and 1 × USB interface, for connecting peripherals and debugging
  • Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc.
  • Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.
 
AMOLED parameters
Display Panel AMOLED Display Size 1.8 inch
Resolution 368 × 448 pixels Display Colors 16.7M
Brightness 350 cd/㎡ Contrast Ratio 100000:1
Communication Interface QSPI Driver IC SH8601
Touch Supported Touch IC FT3168
 
What's On Board
  1. ESP32-S3R8
    The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 8MB PSRAM
  2. QMI8658
    6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
  3. PCF85063
    RTC chip
  4. AXP2101
    Highly integrated power management IC
  5. ES8311
    Low power mono audio codec
  6. Speaker
  7. Backup battery pads
    for connecting backup battery, ensuring RTC function during the replacement of the main battery
 
  1. MX1.25 Lithium battery header
    MX1.25 2P connector, for 3.7V Lithium battery (optional), supports charging and discharging. (To fit inside the case, a battery size of 3.85 × 24 × 28 mm is recommended)
  2. 16MB NOR-Flash
    for storing data
  3. Microphone
  4. Onboard antenna
    Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)
  5. Reserved GPIO pads (pitch 1mm)
    Adopting available IO function pins for easy expansion
  6. BOOT button
    for device startup and function debugging
  7. USB Type-C port
    ESP32-S3 USB interface, for programming and log printing
  8. PWM button
    for system power supply ON/OFF, supports custom functions
บอร์ด ESP32-S3 1.8inch AMOLED Touch Display พร้อมไมค์และลำโพง ของแท้จาก Waveshare
บอร์ด ESP32-S3 1.8inch AMOLED Touch Display พร้อมไมค์และลำโพง ของแท้จาก Waveshare
บอร์ด ESP32-S3 1.8inch AMOLED Touch Display พร้อมไมค์และลำโพง ของแท้จาก Waveshare
บอร์ด ESP32-S3 1.8inch AMOLED Touch Display พร้อมไมค์และลำโพง ของแท้จาก Waveshare
บอร์ด ESP32-S3 1.8inch AMOLED Touch Display พร้อมไมค์และลำโพง ของแท้จาก Waveshare
บอร์ด ESP32-S3 1.8inch AMOLED Touch Display พร้อมไมค์และลำโพง ของแท้จาก Waveshare
เงื่อนไขอื่นๆ
Tags

นโยบายการเปลี่ยนหรือคืนสินค้า


สินค้าทุกชิ้นมีการรับประกัน 30 วันครับ

โดยมีเงื่อนไขต่างๆดังนี้

1. ลูกค้าไม่ได้เป็นผู้ทำเสียหายเอง อาธิเช่น การต่อไฟเลี้ยงไม่ถูกต้อง (เซนเซอร์รับ 3.3v เราใส่ 5v อันนี้ไม่ได้เนอะ)
2. สินค้าต้องอยู่ในสภาพสมบูรณ์ ไม่แตกหักหรือเสียหายจากไฟ (เช่นไฟฟ้าลัดวงจรจนไฟไหม้)
3. ทางร้านไม่รับเปลี่ยนสินค้าจากความเข้าใจผิดของลูกค้าเอง เช่น ขนาดไม่ตรงกับงานที่ใช้, หรือซื้อไว้แต่ไม่ได้ใช้งาน เป็นต้น ลูกค้าสามารถสอบถามข้อมูลสินค้าหากมีความคลุมเครือก่อนสั่งซื้อได้ในไลน์ร้าน @modulemore ตลอดวันทำการ ยกเว้นเวลา 12.00-14.00 ที่อาจมีการตอบช้าในช่วงนี้ 

การส่งคืนสินค้า
การส่งคืนสินค้าจำเป็น ต้องมีใบเสร็จหรือสำเนา เพื่อความรวดเร็วในการตรวจสอบครับ
สามารถส่งคืนได้ผ่านที่อยู่ของร้าน คลิ๊ก โดยเขียนเป็นลายลักษณ์อักษรกำกับดังนี้
1. รายละเอียดรายการเสียหาย
2. ลูกค้าได้ทดสอบอะไรไปบ้าง

ทางร้านขอสงวนสิทธิ์ในการตัดสินใจเปลี่ยนสินค้าหรือคืนเงินครับ

 
ไทย

สินค้าของเรา

เซนเซอร์/ โมดูล [325]

MEMBER ZONE

TRACK & TRACE

*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

OVERVIEW

หน้าที่เข้าชม2,094,527 ครั้ง
ผู้ชมทั้งหมด1,355,253 ครั้ง
ร้านค้าอัพเดท20 ต.ค. 2568

JOIN US

ร้านโมดูลมอร์
ร้านโมดูลมอร์
/www.modulemore.com/
Join เป็นสมาชิกร้าน
604
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
Choose your language
Language
Currency
Change
เปลี่ยนภาษา
รายการสั่งซื้อของฉัน
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านโมดูลมอร์
โมดูลมอร์
ขาย arduino, diy, เรียน arduino, ทำหุ่นยนต์, ฝึกเขียนโปรแกรม, ตั้งแต่ระดับเริ่มต้นจนชำนาญ
เบอร์โทร : 0831710868
อีเมล : modulemore@gmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม