โมดูลรีเลย์ รองรับกระแส 30A 1 channel 30A with optocoupler isolation support high and low level trigger relay module 5V 12V high current

โมดูลรีเลย์ รองรับกระแส 30A 1 channel 30A with optocoupler isolation support high and low level trigger relay module 5V12V high current

1. Module description:

1. The module adopts genuine high-quality 30A relay, the maximum load of the normally open interface: AC 250V/30A , DC 30V/30A;
2. Adopting patch optocoupler isolation, strong driving ability, stable performance; trigger current 5mA ;
3. Module working voltage There are 5V , 12V , 24V to choose from;
4. The module can be triggered by jumpers to set high or low level.
5. The interface design is user-friendly. All interfaces can be directly connected through the wiring terminals, which is very convenient

6. Module size: 72mm * 40mm* 24mm (length * width * height )

     Module size (with module frame): 86mm*43mm*45mm
7. Product net weight: 46g  ;  82g (including module frame)
8. With 4 fixing bolt holes, the hole is 3.1mm , the spacing is 44.5mm*27.5mm

2. Technical parameters:

Relay version quiescent current Maximum current trigger current  5V 5mA 190mA 2-4mA  12V 5mA 80mA 2-4mA  24V 5mA 50mA 2-4mA         

3. Module interface description:

1. DC +: Module DC power supply anode (trigger terminal voltage positive)
2. DC-: Module DC power supply cathode (trigger terminal voltage negative)
3. IN: Signal trigger terminal (the default trigger voltage is the same as the power supply)
4. High / low power Flat trigger mode selection, as shown in the figure, when the jumper is connected to the L terminal, the IN terminal is a low level trigger, and when it is connected to the H terminal, it is a high level trigger
5. Normally closed terminal ( NC ): Normally closed terminal of the relay
6. Common Terminal ( COM ) : Relay common terminal
7.  Normally open terminal ( NO ) : Relay normally open