Information
Item weight
Barcode
Created time
Last updated on
Item description
วิดิโอตัวอย่างการใช้งาน 







 
 
1. GP2Y1014AU0F dust sensor (1) instead of the discontinued GP2Y1010AU0F 
2. 150 ohm resistor (1)
3. 220uF capacitor (1)
4. 6pin connection line (1) [experimental components] 
 
 
 
 
 
Overview
 
      Sharp Optical Dust Sensor (GP2Y1014AU0F) is particularly effective in detecting very fine particles and it is a commonly used air purifier system.


 
      In the device, an infrared light emitting diode and a phototransistor are diagonally arranged to allow it to detect light reflected by dust in the air.
 
      The sensor has extremely low current consumption (up to 20mA, typical of 11 mA) and can carry up to 7VDC sensors. The output is an analog voltage proportional to the measured dust concentration with a sensitivity of 0.5V/0.1mg/m3.
 
Specification
  • Power supply voltage: 5-7V
  • Working temperature: -10-65 degrees Celsius
  • Current consumption: 20mA maximum
  • Minimum particle detection value: 0.8 microns
  • Sensitivity: 0.5V/(0.1mg/m3)
  • Clean air voltage: 0.9V typical
  • Working temperature: -10~65°C
  • Storage temperature: -20~80°C
  • Service life: 5 years
  • Size: 46mm × 30mm × 17.6mm
  • Weight: 15g
 
Detection principle

     The principle is as shown in the figure below. There is a hole in the center of the sensor to let the air flow freely, and the LED light is directed to emit light, and the dust content is determined by detecting the light refracted by the dust in the air.



ตำแหน่ง Connector สำหรับเซนเซอร์



ตัวอย่าง Code 

คลิ๊กเพื่อดูโค้ด

 
Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,072,024 view(s)
Visitors1,332,750 time(s)
Last updatedSep 5, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
600
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me