Information
Item weight
Barcode
Created time
Last updated on
Item description

โมดูลตรวจจับแก๊สเอทานอล, แอลกอฮอล์, ควันบุหรี่ MQ-3 Gas Sensor Ethanol , Smoke , Alcohol , Sensor MQ3



Pin Description

For MQ-3 Sensor Module

Pin Name

Description

VCC

This pin powers the module, typically the operating voltage is +5V

GND

Used to connect the module to system ground

Digital Out (DO)

You can also use this sensor to get digital output from this pin, by setting a threshold value using the potentiometer

Analog Out (AO)

This pin outputs 0-5V analog voltage based on the intensity of the gas

For MQ-3 Sensor

1

H -Pins

Out of the two H pins, one pin is connected to supply and the other to ground

2

A-Pins

The A pins and B pins are interchangeable. These pins will be tied to Supply voltage.

3

B-Pins

A pins and B pins are interchangeable. One pin will act as output while the other will be pulled to ground.

 

Features of MQ-3 Alcohol Sensor

  • Sensor Type - Semiconductor
  • Easy SIP header interface
  • Compatible with most of the microcontrollers
  • Low-power standby mode
  • Requires heater voltage
  • Good sensitivity to alcohol gas
  • Fast response and High sensitivity  
  • Long life and low cost
  • Requires simple Drive circuit

Specifications of MQ-3 Gas Sensor

  • Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off)
  • Current Consumption: 150mA
  • DO output: TTL digital 0 and 1 ( 0.1 and 5V)
  • AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
  • Detecting Concentration: 0.05-10mg/L Alcohol
  • Interface: 1 TTL compatible input (HSW), 1 TTL compatible output (ALR)
  • Heater consumption: less than 750mW
  • Operating temperature: 14 to 122 °F (-10 to 50°C)
  • Load resistance: 200kΩ
  • Sensitivity S: Rs(in air)/Rs(0.4mg/L Alcohol)≥5
  • Sensing Resistance Rs: 2KΩ-20KΩ(in 0.4mg/l alcohol)
  • Dimensions: 32 x 22 x 16 mm
Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,072,276 view(s)
Visitors1,333,002 time(s)
Last updatedSep 5, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
600
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me