Information
Item weight
Barcode
Created time
Last updated on
Item description
Description:
 
The USB to ESP-07 module has a built-in ch340 g USB to TTL driver IC, so you can easily use the computer for ESP-07 function debugging.
The ESP-07 is a wireless serial transceiver module based on the ESP8266 SoC. The system-on-chip integrates the TCP/IP stack. It is a TTL serial communication interface whose parameters can be set by AT com mands. When it is connected to a wifi router, it is widely used in networking and smart home projects. It can be used for remote monitoring of household appliances, bedroom temperature and humidity, and control of home appliances and smart cars via mobile phones.
 
Features:
 
Operating voltage: 4.5V - 5.5V (onboard 3.3v LDO regulator)
Operating current: 300 mA (available from LDO regulator)
Optional working mode: car toggle switch. UART side for serial TTL debugging with AT com mands, program for firmware programming
Universal Serial Bus Interface for Serial TTL Chips: 340g
Logic level: 3.3V
Serial port baud rate: 115200 (default)
Serial communication format: 8 n1
Car reset button
Onboard switch selects UART mode or firmware update mode
Antenna type: Built-in ceramic antenna is available for selection, or an external antenna can be used.
Wireless network mode: station / soft access point / soft access point + station
Wireless standard: 802.11 b / g / n
WIFI @ 2.4 GHz, support wireless protocol / wireless protocol 2 security mode
Designing projects with AT com mands is easy
Size: 5.5 * 1.9 cm
 
Note:
 
Due to the different monitors and lighting effects, the actual color of the project may differ slightly from the color displayed on the image. Thank you!
For manual measurements, please allow a measurement deviation of 0.5 - 1cm.
1cm = 0.4568 "
Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,071,829 view(s)
Visitors1,332,555 time(s)
Last updatedSep 5, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
600
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me