Information
Item weight
Barcode
Created time
Last updated on
Item description

จอ 2.8 inch ILI9341 แบบ pararell 16bit TFT LCD screen LCD display with touch screen module 240X320 HD LCD screen

This module is a general-purpose TFTLCD module. It uses a new LCD module plus the original touch screen. It has no cottage icon and the quality is super good. The module has the following

http://www.lcdwiki.com/2.8inch_16BIT_Module_ILI9341_SKU:MRB2801

Features:

1 , 320 × 240 resolution.

2 , 16-bit color (65,000 colors) display support .

3 , using high-brightness backlight, backlight brightness and low power consumption.

4 , using high quality touch, high sensitivity and high linearity.

5, the use of custom yellow copper-plated pin headers, beautiful and durable.

6, a universal interface for the full range of ALIENTEK development boards.

 

Note: This model's touch screen has no cottage icon!

 

Detailed parameters of the 2.8-inch LCD module:

1. LCD size: 2.8 inches

2. display area: 57.6mm*47.2mm

3. drive IC: ILI9341

4. resolution: 320 * 240 (RGB)

5. color depth: 16 bits (65K color)

6. working voltage: 3.3V or 5V

7. backlight voltage: 3.3V

8. touch screen type: resistive, glass touch screen

9. interface mode: 16 bits (default) / 8 bits configurable

10. module size: 51mm * 82.6mm

 

 


วิดีโอสาธิตการใช้งาน


Wiring 


The red box in the above figure is the 8-bit/16-bit data bus mode switch, which is described as follows:

Solder R5 with 0Ω resistor or short circuit directly, and disconnect R4: select 16-bit data bus mode (default), use DB0~DB15 data pin
Solder R4 with 0Ω resistor or short circuit directly, and disconnect R5: select 8-bit data bus mode, use DB8~DB15 data pin
Number Pin Label Description
1 CS LCD reset control pin( low level enable)
2 RS LCD register / data selection control pin(high level: register, low level: data)
3 WR LCD write control pin
4 RD LCD read control pin 
5 RST LCD reset control pin( low level reset)
6 DB0 LCD data bus low 8-bit pin(When 8-bit parallel data bus mode is selected, the lower 8-bit data pins are not used)
7 DB1
8 DB2
9 DB3
10 DB4
11 DB5
12 DB6
13 DB7
14 DB8 LCD data bus high 8-bit pin
15 DB9
16 DB10
17 DB11
18 DB12
19 DB13
20 DB14
21 DB15
22 SDCS SD card selection control pin (used when using the SD card expansion function, this test program is not used)
23 BL LCD backlight control pin(High level light)
24 VDD Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V)
25 VDD
26 GND Module power ground pin
27 GND
28 NC Undefined, reserved
29 MISO Touch screen SPI bus data input pin
30 MOSI Touch screen SPI bus data output pin
31 PEN Touch screen interrupt detection pin(Low level when a touch occurs)
32 F_CS Flash chip select control pin (used when using the Flash extension function, this test program is not used)
33 T_CS Touch screen IC chip select control pin(Low level enable)
34 CLK Touch screen SPI bus clock control pin

 

Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,072,024 view(s)
Visitors1,332,750 time(s)
Last updatedSep 5, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
600
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me