ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า
Parameter:
  • Module style: Non-isolated additional modules
  • Module size: Length 65MM * Height 23MM * (56.5MM width including heat sink)
  • Input mode: IN + input is positive, IN-input is negative
  • Output mode: OUT + output is positive, OUT-output is negative
  • Wiring method: No soldering
  • Input voltage: 10-32V
  • Output voltage: continuously adjustable (12-35V), our delivery default voltage is 19V
  • Output current: 6A (MAX)
  • Input current: 10A (MAX) (more than 10A, please strengthen the heat)
  • Output power: 100W (MAX) natural cooling plus 150W (MAX) fan
  • Easily drive 65W 90W laptops, including dual cores
  • Using a 12V battery with a normal laptop temperature 19V 3.42A about 45 degrees
  • Conversion efficiency: 94% (measured when entering the output 16V 19V 2.5A) (for reference only)
  • Operating temperature: industrial grade (-40 ° C to +85 ° C) (the ambient temperature is higher than 40 degrees, please reduce the power consumption or increase the fan)
  • Increase of full load temperature: 45 ° C
  • No load current 25mA general
  • Short circuit protection: none (please install the overcurrent protector at the input)
  • Reverse Input Connection Protection: None, Series Serial Diode


Application period:
1) DIY car power supply, adjustable output, must connect your 12V power supply at the input, you can (14-35V) free continuously adjustable But the output voltage can not be lower than the input voltage
2) Laptop car power supply The input is connected to your 12V power supply and the output is controlled by the voltage of your notebook to operate.
3) Boost charger. You can use a 12V power supply to charge a higher battery than 12V, such as a 24V battery.
4) Power up your electronic devices Just adjust the voltage to the voltage you need and the current does not exceed the rated current.
5) The system is a step-first power supply When you are doing 10-18V project inputs, your system board needs 24V power and the power is very large. But the power of the normal DC-DC module is too small. Then you choose, our module will be your best choice, you can work without debugging directly on the machine, easy to achieve high efficiency and high power boost.
 
Package included:
 
  • 1 x power supply
เงื่อนไขอื่นๆ
Tags

นโยบายการเปลี่ยนหรือคืนสินค้า


สินค้าทุกชิ้นมีการรับประกัน 30 วันครับ

โดยมีเงื่อนไขต่างๆดังนี้

1. ลูกค้าไม่ได้เป็นผู้ทำเสียหายเอง อาธิเช่น การต่อไฟเลี้ยงไม่ถูกต้อง (เซนเซอร์รับ 3.3v เราใส่ 5v อันนี้ไม่ได้เนอะ)
2. สินค้าต้องอยู่ในสภาพสมบูรณ์ ไม่แตกหักหรือเสียหายจากไฟ (เช่นไฟฟ้าลัดวงจรจนไฟไหม้)
3. ทางร้านไม่รับเปลี่ยนสินค้าจากความเข้าใจผิดของลูกค้าเอง เช่น ขนาดไม่ตรงกับงานที่ใช้, หรือซื้อไว้แต่ไม่ได้ใช้งาน เป็นต้น ลูกค้าสามารถสอบถามข้อมูลสินค้าหากมีความคลุมเครือก่อนสั่งซื้อได้ในไลน์ร้าน @modulemore ตลอดวันทำการ ยกเว้นเวลา 12.00-14.00 ที่อาจมีการตอบช้าในช่วงนี้ 

การส่งคืนสินค้า
การส่งคืนสินค้าจำเป็น ต้องมีใบเสร็จหรือสำเนา เพื่อความรวดเร็วในการตรวจสอบครับ
สามารถส่งคืนได้ผ่านที่อยู่ของร้าน คลิ๊ก โดยเขียนเป็นลายลักษณ์อักษรกำกับดังนี้
1. รายละเอียดรายการเสียหาย
2. ลูกค้าได้ทดสอบอะไรไปบ้าง

ทางร้านขอสงวนสิทธิ์ในการตัดสินใจเปลี่ยนสินค้าหรือคืนเงินครับ

 
ไทย

สินค้าของเรา

เซนเซอร์/ โมดูล [323]

MEMBER ZONE

TRACK & TRACE

*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

OVERVIEW

หน้าที่เข้าชม2,073,199 ครั้ง
ผู้ชมทั้งหมด1,333,925 ครั้ง
ร้านค้าอัพเดท8 ก.ย. 2568

JOIN US

ร้านโมดูลมอร์
ร้านโมดูลมอร์
/www.modulemore.com/
Join เป็นสมาชิกร้าน
601
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
Choose your language
Language
Currency
Change
เปลี่ยนภาษา
รายการสั่งซื้อของฉัน
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านโมดูลมอร์
โมดูลมอร์
ขาย arduino, diy, เรียน arduino, ทำหุ่นยนต์, ฝึกเขียนโปรแกรม, ตั้งแต่ระดับเริ่มต้นจนชำนาญ
เบอร์โทร : 0831710868
อีเมล : modulemore@gmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม