ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า

Description:
 
The module has an interface pinout is almost the same with A4988 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications.
DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step).
It uses 8.2 - 45V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling).


ตัวอย่างการต่อกับ Arduino UNO/NANO



UNO -----> DRV8825
5V   ------> SLP,RES
GND ------> GND
D7   -------> EN
D8  -------> DIR
D9  -------> STP


DRV8825----->NEMA17
1B--------->สายแรก
1A--------->สายสอง
2A--------->สายสาม
2B--------->สายสี่
 
ตัวเก็บประจุ 100uF ขั้ว + ต่อเข้าไฟเข้า VMT ขั้ว - ต่อเข้า GND



ตัวอย่างโค้ด
const int dirPin = 8; const int stepPin = 9; const int enablePin = 7; void setup() { pinMode(enablePin, OUTPUT); pinMode(stepPin, OUTPUT); pinMode(dirPin, OUTPUT); digitalWrite(enablePin, LOW); } void loop() { const int steps = 2000; const int delayMicros = 500; const int delayMillis = 1000; digitalWrite(dirPin, HIGH); for (int i = 0; i < steps; i++) { digitalWrite(stepPin, HIGH); delayMicroseconds(delayMicros); digitalWrite(stepPin, LOW); delayMicroseconds(delayMicros); } delay(delayMillis); digitalWrite(dirPin, LOW); for (int i = 0; i < steps; i++) { digitalWrite(stepPin, HIGH); delayMicroseconds(delayMicros); digitalWrite(stepPin, LOW); delayMicroseconds(delayMicros); } delay(delayMillis); }
 
Features:
- Simple step and direction control interface
- The interface can connect directly with 3.3V and 5V systems
- Support over-temperature thermal shutdown, over-current shutdown and under-voltage lockout
- Support short-to-ground and shorted-load protection
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Adjustable current control support you to set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45V maximum supply voltage
- Built-in regulator (needed external logic voltage supply)
 
Package included:
 
1 x Stepstick DRV8825 stepper driver
1 x Heat sink




สามารถใช้คู่กับฐานรองบอร์ดเพื่อประหยัดเวลาต่อสายไฟ

ฐานรองบอร์ดขับสเตปเปอร์มอเตอร์ 4988/8825 stepper motor drive module expansion board
 
 
บอร์ดขับมอเตอร์ DRV8825 stepper motor drive
บอร์ดขับมอเตอร์ DRV8825 stepper motor drive
บอร์ดขับมอเตอร์ DRV8825 stepper motor drive
บอร์ดขับมอเตอร์ DRV8825 stepper motor drive
บอร์ดขับมอเตอร์ DRV8825 stepper motor drive
บอร์ดขับมอเตอร์ DRV8825 stepper motor drive
บอร์ดขับมอเตอร์ DRV8825 stepper motor drive
เงื่อนไขอื่นๆ
Tags

นโยบายการเปลี่ยนหรือคืนสินค้า


สินค้าทุกชิ้นมีการรับประกัน 30 วันครับ

โดยมีเงื่อนไขต่างๆดังนี้

1. ลูกค้าไม่ได้เป็นผู้ทำเสียหายเอง อาธิเช่น การต่อไฟเลี้ยงไม่ถูกต้อง (เซนเซอร์รับ 3.3v เราใส่ 5v อันนี้ไม่ได้เนอะ)
2. สินค้าต้องอยู่ในสภาพสมบูรณ์ ไม่แตกหักหรือเสียหายจากไฟ (เช่นไฟฟ้าลัดวงจรจนไฟไหม้)
3. ทางร้านไม่รับเปลี่ยนสินค้าจากความเข้าใจผิดของลูกค้าเอง เช่น ขนาดไม่ตรงกับงานที่ใช้, หรือซื้อไว้แต่ไม่ได้ใช้งาน เป็นต้น ลูกค้าสามารถสอบถามข้อมูลสินค้าหากมีความคลุมเครือก่อนสั่งซื้อได้ในไลน์ร้าน @modulemore ตลอดวันทำการ ยกเว้นเวลา 12.00-14.00 ที่อาจมีการตอบช้าในช่วงนี้ 

การส่งคืนสินค้า
การส่งคืนสินค้าจำเป็น ต้องมีใบเสร็จหรือสำเนา เพื่อความรวดเร็วในการตรวจสอบครับ
สามารถส่งคืนได้ผ่านที่อยู่ของร้าน คลิ๊ก โดยเขียนเป็นลายลักษณ์อักษรกำกับดังนี้
1. รายละเอียดรายการเสียหาย
2. ลูกค้าได้ทดสอบอะไรไปบ้าง

ทางร้านขอสงวนสิทธิ์ในการตัดสินใจเปลี่ยนสินค้าหรือคืนเงินครับ

 
ไทย

สินค้าของเรา

เซนเซอร์/ โมดูล [323]

MEMBER ZONE

TRACK & TRACE

*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

OVERVIEW

หน้าที่เข้าชม2,082,346 ครั้ง
ผู้ชมทั้งหมด1,343,072 ครั้ง
ร้านค้าอัพเดท23 ก.ย. 2568

JOIN US

ร้านโมดูลมอร์
ร้านโมดูลมอร์
/www.modulemore.com/
Join เป็นสมาชิกร้าน
601
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
Choose your language
Language
Currency
Change
เปลี่ยนภาษา
รายการสั่งซื้อของฉัน
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านโมดูลมอร์
โมดูลมอร์
ขาย arduino, diy, เรียน arduino, ทำหุ่นยนต์, ฝึกเขียนโปรแกรม, ตั้งแต่ระดับเริ่มต้นจนชำนาญ
เบอร์โทร : 0831710868
อีเมล : modulemore@gmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม