ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า
รายละเอียดสินค้า


Features:
 
- Bluetooth 4.0 module Serial port extraction bluetooth BLE CC2540 CC2541
- The bluetooth module has a backplane, and the HM-10 module is used on this module.
- 5V power supply or 3.3V power supply. The serial port level is the same as the power supply voltage.
- Built-in level shifting function.
 
Specifications:
 
- Input voltage: 3.3V/5V
- If a 5.0V MCU is used to communicate with the bluetooth module, the 5.0V power port is powered, and the RX TX logic level is 5V.
- If a 3.3V MCU is used to communicate with the bluetooth module, the 3.3V power port is powered, and the RX TX logic level is 3.3V.
 

  • Chipset based on CC2541
  •  Bluetooth Class 2
  •  Industrial level Bluetooth module SPP
  •  Flash 256Kb
  •  Integrated chip antenna
  •  Power supply: + 3.3 VDC 50 mA
  •  Working temperature: ‑5 C to + 60 C
  •  Frequency of operation: 2.4 GHz ISM Band
  •  Modulation method: GFSK (Gaussian Frequency Shift keying)
  • 40 channels, 2MHz, 3 fixed transmission channels, 37 automatic frequency adaptation channels through data channels;
  •  Output power adjustment (-23dBm ~ 6dBm); command AT +
  •  Transfer speed: asynchronous: 6 kbps synchronous: 6kbps
  •  Security features: authentication and encryption
  •  Power consumption: automatic sleep mode, standby current 90uA, transfer of 8.5mA
  •  PCB size: 37x16mm
  •  The default baud rate is 9600
  •  The default PIN is 000000
  •  AT commands require end-of-line characters (\ r \ n)
  •  Firmware is reported as Firmware V3.0.6, Bluetooth V4.0 LE
  •  The firmware is from Bolutek
  •  AT + HELP — list of available commands
  •  The modules report themselves as BT05
  •  The status pin is normally LOW and turns HIGH when the device is connected
  •  Pin EN does not seem to do anything
 
Pin:
 
RX, the serial port receiving end of the bluetooth module is connected to the TXD of the MCU.

TX, the serial port sender of the bluetooth module is connected to the RXD of the MCU.

GND, ground terminal negative

3.3V, 3.3V power supply at the power supply

5V, power supply 5V power supply
เงื่อนไขอื่นๆ
Tags

นโยบายการเปลี่ยนหรือคืนสินค้า


สินค้าทุกชิ้นมีการรับประกัน 30 วันครับ

โดยมีเงื่อนไขต่างๆดังนี้

1. ลูกค้าไม่ได้เป็นผู้ทำเสียหายเอง อาธิเช่น การต่อไฟเลี้ยงไม่ถูกต้อง (เซนเซอร์รับ 3.3v เราใส่ 5v อันนี้ไม่ได้เนอะ)
2. สินค้าต้องอยู่ในสภาพสมบูรณ์ ไม่แตกหักหรือเสียหายจากไฟ (เช่นไฟฟ้าลัดวงจรจนไฟไหม้)
3. ทางร้านไม่รับเปลี่ยนสินค้าจากความเข้าใจผิดของลูกค้าเอง เช่น ขนาดไม่ตรงกับงานที่ใช้, หรือซื้อไว้แต่ไม่ได้ใช้งาน เป็นต้น ลูกค้าสามารถสอบถามข้อมูลสินค้าหากมีความคลุมเครือก่อนสั่งซื้อได้ในไลน์ร้าน @modulemore ตลอดวันทำการ ยกเว้นเวลา 12.00-14.00 ที่อาจมีการตอบช้าในช่วงนี้ 

การส่งคืนสินค้า
การส่งคืนสินค้าจำเป็น ต้องมีใบเสร็จหรือสำเนา เพื่อความรวดเร็วในการตรวจสอบครับ
สามารถส่งคืนได้ผ่านที่อยู่ของร้าน คลิ๊ก โดยเขียนเป็นลายลักษณ์อักษรกำกับดังนี้
1. รายละเอียดรายการเสียหาย
2. ลูกค้าได้ทดสอบอะไรไปบ้าง

ทางร้านขอสงวนสิทธิ์ในการตัดสินใจเปลี่ยนสินค้าหรือคืนเงินครับ

 
ไทย

สินค้าของเรา

เซนเซอร์/ โมดูล [323]

MEMBER ZONE

TRACK & TRACE

*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

OVERVIEW

หน้าที่เข้าชม2,073,048 ครั้ง
ผู้ชมทั้งหมด1,333,774 ครั้ง
ร้านค้าอัพเดท7 ก.ย. 2568

JOIN US

ร้านโมดูลมอร์
ร้านโมดูลมอร์
/www.modulemore.com/
Join เป็นสมาชิกร้าน
600
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
Choose your language
Language
Currency
Change
เปลี่ยนภาษา
รายการสั่งซื้อของฉัน
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านโมดูลมอร์
โมดูลมอร์
ขาย arduino, diy, เรียน arduino, ทำหุ่นยนต์, ฝึกเขียนโปรแกรม, ตั้งแต่ระดับเริ่มต้นจนชำนาญ
เบอร์โทร : 0831710868
อีเมล : modulemore@gmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม