โมดูลแปลง Voltage เป็น PWM 0-5V/0-10V to 0-100% Analog to PWM converter

โมดูลแปลง Voltage เป็น PWM 0-5V/0-10V to 0-100% Analog to PWM converter

Features:

1: Wide range of applications

2: Easy to operate, can be fine-tuned by potentiometer

3: The module is small, easy to carry and easy to use;

4: Adopt single chip embedded technology;

5: Simple and easy to understand

Product parameters

1. Adopt single chip embedded technology;

2. Easy to operate, can be fine-tuned by potentiometer;

3. Select different input voltage ranges through the short circuit;

4. The module is small, easy to carry and use;

5. Module working voltage: DC5V-12V;

6. Conversion range: 0-5V/0-10V voltage is converted to 0%-100% PWM;

7. Allowable error: 1%-3%;

8. Output PWM amplitude: 5V

9. Output PWM frequency: about 50KHz

(1) VCC: Working power supply 5V-12V.

(2) GND: working power ground

(3) VIN: Input voltage 0-10v.

(4) GND: Input voltage ground.

(5) GND: output PWM ground.

(6) PWM: output PWM.

(7) Operation instructions. Connect the working voltage to VCC and GND, not reverse, so as not to damage the board and device

(8) Connect the controllable voltage to the VIN terminal, the voltage range is divided into 0-5V and 0-10v according to the selected mode.

(9) The output at the PWM terminal is PWM.

(10) The duty cycle can be adjusted by adjusting the voltage.

(11) The accuracy can be controlled by adjusting the potentiometer.

Packing list:

1* Voltage to PWM module