ตัวหลอก Fast charge USB-C สำหรับ PD2.0 PD3.0 Fast charge decoy ZY12PDS

รายละเอียดสินค้า

   โมดูลนี้เอาไว้ต่อกับอุปกรณ์จ่ายพลังงานที่รองรับ Fast charge มาตรฐาน โดยจะเข้าไป Trigger ตัว Adapter ให้ปล่อยกระแสและแรงดันออกมาเสมือนกับอุปกรณ์ปลายทางเรารองรับ Fast charge โดยการกดปุ่มเลือกแรงดันขาออกได้คือ 9v, 12v, 15v, 20v โดยกระแสได้สูงสุดถึง 5A กำลังมากถึง 100W 

Specification:

Product Name: Decoy fast charge trigger detector
Color: As picture shwon
Power: 100W
Voltage: 3-20V
Current: 0-5A
 

ZY12PDN:
Feature

1.Can set button cut voltage or 9v 12v 15v 20V or automatic test
2.Provide Z cheap, cost-effective Z high PD spoof power detection program, Z violates the advertising method of their own brain.
3.Breaking the strange circle of the previous PD detector price, do your part for PD popularization!
4.The PD trigger uses the hardware protocol IC, and the compatibility is not comparable to the soft solution.
5.The version with USB adopts ARINTECH pure copper female seat imported from South Korea. The non-domestic iron shell can be compared and the internal resistance is small.
6.Large-volume three-terminal regulator, large-capacity ceramic capacitor filter, Japan ALPS tact switch, focusing on stability.
7.With USB soldering position and 5.08 screw terminal soldering position, it is convenient to make Type-C to DC adapter cable.
8.Small size 15mm wide * 30mm long, soldered DC line heat shrinkable tube can be used to charge your notebook with PD mobile power.ZY12PDG industrial grade

specification:

1.Withstand voltage between positive and negative 20V between any two terminals of industrial grade. Input voltage anti-reverse connection.
2.Effectively prevent problems such as VBUS short circuit to CC burning during the test.
3.It is very suitable for testing fixtures to directly measure the bare power module. It does not need to be assembled to measure.
Or DIY fast charging lure with plug. No hardware switch is not easy to accidentally touch the voltage.
4.When using the 5A-EMARK line DIY, the maximum power is supported to 100W. The compatibility is excellent.
5.The hole pitch is 2.54mm. It is convenient to insert the soldering pin into other motherboards.
6.Turning the TRIG foot to ground is equivalent to pressing the button. It can be triggered by optocoupler or relay isolation.
7.If CC1 or CC2 is connected to the male, you only need to pick one of them.