ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า
Single chip microcomputer TTL to RS485 module 485 to serial port UART level mutual conversion hardware automatic control flow direction
 
Features of this module:
  • All chips are guaranteed to be brand-new imported industrial-grade chips, and the ultra-long distance transmission can reach thousands of kilometers .
  • ESD protection with plus or minus 15KV
  • The chip has a limited slew rate driver to minimize EMI and reduce signal reflections caused by improper terminal matching cables , so that the error-free signal transmission rate is as high as 500Kbps .
  • The input impedance of the receiver with 1/4 unit load supports multi-machine communication and allows connection to a bus of up to 128 devices .
  • The working temperature of industrial grade chips can reach -40℃ to +85℃ .
  • This module can be hot-swapped , and there will be no signal bolting phenomenon caused by hot-plugging of other 485 chips.
  • The power supply uses chip tantalum electrolytic capacitors , and double capacitors are used for high and low frequency power supply filtering.
  • Using dual transient suppression diodes , the overvoltage protection performance is better
  • Use 10Ω current protection resistors, patch design to improve 485 signal integrity
  • With terminals and welding lead holes , it is convenient to debug and finalize the wiring. Welding leads can improve signal reliability
  • RS485, TTL signals of all single-sided cord , ensure signal quality, improve signal integrity
  • Large area copper laying to prevent signal interference
  • With 2.54 pitch hole plate welding holes , convenient for your secondary development
  • With M3 screw holes that are quite commonly used at present , easy and reliable installation
  • With 120Ω termination resistance , short- circuit R16 to enable termination resistance
  • With power supply and RXD, TXD signal indicator , the receiving and sending status can be seen at a glance
  • Lead-out pin is easy to test
  • support 3.3V and 5V signal control system , compatibility stronger
เงื่อนไขอื่นๆ
Tags

นโยบายการเปลี่ยนหรือคืนสินค้า


สินค้าทุกชิ้นมีการรับประกัน 30 วันครับ

โดยมีเงื่อนไขต่างๆดังนี้

1. ลูกค้าไม่ได้เป็นผู้ทำเสียหายเอง อาธิเช่น การต่อไฟเลี้ยงไม่ถูกต้อง (เซนเซอร์รับ 3.3v เราใส่ 5v อันนี้ไม่ได้เนอะ)
2. สินค้าต้องอยู่ในสภาพสมบูรณ์ ไม่แตกหักหรือเสียหายจากไฟ (เช่นไฟฟ้าลัดวงจรจนไฟไหม้)
3. ทางร้านไม่รับเปลี่ยนสินค้าจากความเข้าใจผิดของลูกค้าเอง เช่น ขนาดไม่ตรงกับงานที่ใช้, หรือซื้อไว้แต่ไม่ได้ใช้งาน เป็นต้น ลูกค้าสามารถสอบถามข้อมูลสินค้าหากมีความคลุมเครือก่อนสั่งซื้อได้ในไลน์ร้าน @modulemore ตลอดวันทำการ ยกเว้นเวลา 12.00-14.00 ที่อาจมีการตอบช้าในช่วงนี้ 

การส่งคืนสินค้า
การส่งคืนสินค้าจำเป็น ต้องมีใบเสร็จหรือสำเนา เพื่อความรวดเร็วในการตรวจสอบครับ
สามารถส่งคืนได้ผ่านที่อยู่ของร้าน คลิ๊ก โดยเขียนเป็นลายลักษณ์อักษรกำกับดังนี้
1. รายละเอียดรายการเสียหาย
2. ลูกค้าได้ทดสอบอะไรไปบ้าง

ทางร้านขอสงวนสิทธิ์ในการตัดสินใจเปลี่ยนสินค้าหรือคืนเงินครับ

 
ไทย

สินค้าของเรา

เซนเซอร์/ โมดูล [323]

MEMBER ZONE

TRACK & TRACE

*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

OVERVIEW

หน้าที่เข้าชม2,072,435 ครั้ง
ผู้ชมทั้งหมด1,333,161 ครั้ง
ร้านค้าอัพเดท6 ก.ย. 2568

JOIN US

ร้านโมดูลมอร์
ร้านโมดูลมอร์
/www.modulemore.com/
Join เป็นสมาชิกร้าน
600
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
Choose your language
Language
Currency
Change
เปลี่ยนภาษา
รายการสั่งซื้อของฉัน
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านโมดูลมอร์
โมดูลมอร์
ขาย arduino, diy, เรียน arduino, ทำหุ่นยนต์, ฝึกเขียนโปรแกรม, ตั้งแต่ระดับเริ่มต้นจนชำนาญ
เบอร์โทร : 0831710868
อีเมล : modulemore@gmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม