ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า
Introduction
     TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 arduino stepper motor driver has a wide range power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors. 
     The stepper driver supports speed and direction control. You can set its micro step and output current with 6 DIP switch. There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability. 
As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.
 
ตัวอย่างการต่อกับ Arduino UNO




ตัวอย่าง Code TB6600 ต่อคู่กับ Arduino UNO 

s2nen.com/ดูบทความ-41054-การใช้งาน-stepper-motor-กับ-control-drive-tb6600-arduino.html





Features
Support 8 kinds of current control
Support 7 kinds of micro steps adjustable
The interface adopts high-speed optocoupler isolation
Automatic semi-flow to reduce heat
Large area heat sink
Anti-high-frequency interference ability
Input anti-reverse protection
Overheat, over current and short circuit protection

Specification
Input Current: 0~5A
Output Current: 0.5~4.0A
Control Signal 3.3~24V
Power (MAX): 160W
Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
Temperature: -10~45℃
Humidity: No Condensation
Weight: 0.2 kg
Dimension: 96 * 71 * 37 mm
 
*


Electrical environment:

cooling method Natural cooling or forced air cooling.
 occasion
Can not be placed next to other heating equipment, to avoid dust, oil, corrosive gases, high humidity and strong earthquake sites,
Combustible gas and conductive dust are prohibited.
 humidity  40-90%RH
 shock  10-55Hz/0.15mm
 Storage temperature  -20-65℃
 weight 0.15kg 
 
 
Subdivision setting:

     Use S1, S2, S3 three-position dial switch to set subdivision (pulse), as shown in the following table:

Segmentation  Pulse number / circle  S1  S2  S3
 NC  NC  ON  ON  ON
 1  200  ON  ON  OFF
 2/A  400  ON  OFF  ON
 2/B  400  OFF  ON  ON
 4  800  ON  OFF  OFF
 8  1600  OFF  ON  OFF
 16  3200  OFF  OFF  ON
 32  6400  OFF  OFF  OFF

 

Operating current setting

     Use S4, S5, S6 three-position dial switch to set the output operating current, as shown in the following table:


Average current  Peak current  S4  S5  S6
 0.5A  0.7A  ON  ON  ON
 1.0A  1.2A  ON  OFF  ON
 1.5A  1.7A  ON  ON  OFF
 2.0A  2.2A  ON  OFF  OFF
 2.5A  2.7A  OFF  ON  ON
 2.8A  2.9A  OFF  OFF  ON
 3.0A  3.2A  OFF  ON  OFF
 3.5A  4.0A  OFF  OFF  OFF

เงื่อนไขอื่นๆ
Tags

นโยบายการเปลี่ยนหรือคืนสินค้า


สินค้าทุกชิ้นมีการรับประกัน 30 วันครับ

โดยมีเงื่อนไขต่างๆดังนี้

1. ลูกค้าไม่ได้เป็นผู้ทำเสียหายเอง อาธิเช่น การต่อไฟเลี้ยงไม่ถูกต้อง (เซนเซอร์รับ 3.3v เราใส่ 5v อันนี้ไม่ได้เนอะ)
2. สินค้าต้องอยู่ในสภาพสมบูรณ์ ไม่แตกหักหรือเสียหายจากไฟ (เช่นไฟฟ้าลัดวงจรจนไฟไหม้)
3. ทางร้านไม่รับเปลี่ยนสินค้าจากความเข้าใจผิดของลูกค้าเอง เช่น ขนาดไม่ตรงกับงานที่ใช้, หรือซื้อไว้แต่ไม่ได้ใช้งาน เป็นต้น ลูกค้าสามารถสอบถามข้อมูลสินค้าหากมีความคลุมเครือก่อนสั่งซื้อได้ในไลน์ร้าน @modulemore ตลอดวันทำการ ยกเว้นเวลา 12.00-14.00 ที่อาจมีการตอบช้าในช่วงนี้ 

การส่งคืนสินค้า
การส่งคืนสินค้าจำเป็น ต้องมีใบเสร็จหรือสำเนา เพื่อความรวดเร็วในการตรวจสอบครับ
สามารถส่งคืนได้ผ่านที่อยู่ของร้าน คลิ๊ก โดยเขียนเป็นลายลักษณ์อักษรกำกับดังนี้
1. รายละเอียดรายการเสียหาย
2. ลูกค้าได้ทดสอบอะไรไปบ้าง

ทางร้านขอสงวนสิทธิ์ในการตัดสินใจเปลี่ยนสินค้าหรือคืนเงินครับ

 
ไทย

สินค้าของเรา

เซนเซอร์/ โมดูล [323]

MEMBER ZONE

TRACK & TRACE

*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

OVERVIEW

หน้าที่เข้าชม2,072,665 ครั้ง
ผู้ชมทั้งหมด1,333,391 ครั้ง
ร้านค้าอัพเดท6 ก.ย. 2568

JOIN US

ร้านโมดูลมอร์
ร้านโมดูลมอร์
/www.modulemore.com/
Join เป็นสมาชิกร้าน
600
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
Choose your language
Language
Currency
Change
เปลี่ยนภาษา
รายการสั่งซื้อของฉัน
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านโมดูลมอร์
โมดูลมอร์
ขาย arduino, diy, เรียน arduino, ทำหุ่นยนต์, ฝึกเขียนโปรแกรม, ตั้งแต่ระดับเริ่มต้นจนชำนาญ
เบอร์โทร : 0831710868
อีเมล : modulemore@gmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม