บอร์ด Pro Mini 328 - 5V/16MHz พร้อม Pin Header (arduino-compatible board)

Is super tiny, thin and in Blue. This Pro Mini was designed to minimal circuit of Arduino-compatible board. This is a 5V Arduino-compatible board running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. This is good if your project have limited space and you are familiar with Arduino. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

 

 

This board is really lower the cost of an Arduino. The Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, all SMD components are used, made it two layer, etc. This board connects directly to the UC00A Rev2.0 and supports auto-reset. You might need the Straight Pin Header or Right Angle Pin Header.

 

The professional version of the Pro Mini is a microcontroller circuit board. It has 14 digital input/output pins (6 of which can be used as PWM outputs), 8 analog inputs, an 8MHz resonator, a reset button, and mounting hole pin headers.

ATMEGA328P 5V/16M/ATMEGA328P 3.3V/8M

1. 14 digital input/output ports RX, TX, D2 D13

2. 8 analog input ports A0~A7

3. 1 pair of TTL level serial port transceiver port RX/TX

4. 6 PWM ports, D3, D5, D6, D9, D10, D11

5. Using Atmel Atmega328P-AU microcontroller

6. Support serial port download

7. Supports external 3.3V~12V DC power supply

8. Support 9V battery power supply

9. Clock frequency 16MHz

10. Size: 33.3*18.0 (mm)