Item description
| Information |
Item weight
Barcode
Created time
Last updated on
|
| Item description |
Supported Protocols & Modes:
• Support PD3.0, PD2.0, QC, FCP, AFC voltage decoy output, free mode switch. You can also set that only PD is supported.
• Support 5V/9V/12V/20V decoy output (specific range depends on your power supply).
• With key lock function, to prevent misoperation (to avoid damaging load equipment by setting voltage wrongly).
Quick Settings & LED Indication:
• 5V/9V/12V/20V quick setting.
• LED indicates output.
• The parameters are saved automatically, and the last deception setting is executed after power on.
Power & Output Specifications:
• Ultra low power consumption, high current, supporting 100W output.
• The maximum output is 20V5A (the actual value depends on your power supply).
• Type-c is solid and durable.
Automatic Functions & Test Modes:
• Support automatic polling to the highest voltage and keep it, and automatic polling to the highest voltage then maintain to 5V, infinite loop and other test functions.
• The test jump time is adjustable.
• Suitable for aging test, the module can withstand voltage above 30V.
• Each voltage can be connected externally – one key can be used for quick switching.
Short Circuit & Key Interface Details:
• PD ONLY short circuit contact: the module only supports PD protocol after short circuit.
• DM and DP short contacts: DM and DP can be output from USB after short circuit, unless required, short circuit is not recommended.
• 5 independent key interfaces: 5 independent keys can be connected to quickly switch voltage, which can be short pressed or long press or short circuit. The upper ends in the figure are all grounded contacts, which are connected together on the circuit.
• S1 short contact: it is set for key lock. After short connection, the switching voltage needs to be unlocked by pressing the key to power on, and re unlock it when power on again.
• F1 short circuit: power on to automatically poll the highest voltage and then maintain it to 5V. And the LED will display – the LED lamp corresponding to the voltage that should be supported is all on, otherwise it is flashing.
• F2 short circuit: short circuit with F1, but maintain the highest voltage supported by output after polling.
• F1 and F2 are shorted at the same time: it is an infinite loop test. The voltage will switch from low to high cycle output.
• The default polling and jump time is 0.5 seconds, which can be modified according to the following red ink method.
Polling or Voltage Jump Time Setting (when F1 and F2 are short circuited):
• Press and hold the key without powering on.
• The first LED flashes. If the key is released, it is unlocked. Otherwise, continue to press straight.
• When all LEDs flash, release the key to enter the time setting, and the switching time is reset to 0.5 seconds, then add 0.5 seconds, and the LED will display the time required (if you are not familiar with binary, you can count how many times you have added the time).
• Increase it for 30 times (the corresponding maximum time is 15.5 seconds, and the LED lights are all on).
• If no key is pressed within 3 seconds, the time setting will automatically pop up and the setting value will be saved. Reminder by flashing LED.      |
| Conditions |
|
| Tags |
Exchange or return policy
Every item comes with a 30-day warranty. However, there are certain conditions that apply:
-
The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).
-
The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).
-
The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.
Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:
- Provide a detailed description of the damaged item(s).
- Mention any tests or experiments conducted by the customer.
Please note that the store reserves the right to make the final decision regarding product replacement or refund.
English▾
MEMBER ZONE
JOIN US
ร้านModuleMore
/www.modulemore.com/en
Become a member of this store to receive special offers and promotions
ModuleMore
Become a member of this store to receive special offers and promotions
Special thanks very good images from Freepik
English▾
Choose your language
Language
Currency
Change
Modify language
▲
▼
My orders
My orders
This seller's information
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Search items from this seller
Search for items
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page
↑
TOP Back to top
TOP Back to top
Items in cart ({{total_num}} type)
We apologise, your cart currently is empty
Total
฿ {{price_format(total_price)}}
- ฿ {{price_format(discount.price)}}
Total
{{total_quantity}} Unit(s)
฿ {{price_format(after_product_price)}}
excluding shipping fee
VAT Included.
➜ Continue shopping