Information
Item weight
Barcode
Created time
Last updated on
Item description

แนะนำผลิตภัณฑ์

XL74610L คือโมดูลไดโอดในอุดมคติ (Ideal Diode Module) ที่ออกแบบมาเพื่อทดแทนโซลูชัน XL74610 มาพร้อมข้อดีด้านประสิทธิภาพสูงโดยไม่ต้องอ้างอิงขั้วไฟฟ้า (polarity referencing) ภายในใช้ทรานซิสเตอร์ PMOS ที่มีความต้านทานต่ำถึงสองตัว ทำให้เกิดความร้อนต่ำและลดการสูญเสียพลังงาน เมื่อเทียบกับไดโอด Schottky ทั่วไป สามารถลดการสูญเสียได้มากถึง 3W จากการทดสอบพบว่าหลังเปลี่ยนมาใช้ XL74610L อุณหภูมิขณะทำงานลดลงได้หลายองศา แรงดันตกคร่อม (voltage drop) อยู่ที่ประมาณ 50mV และยังคงใช้แพ็กเกจที่เข้ากันได้สะดวก

ข้อมูลจำเพาะของผลิตภัณฑ์

  • แรงดันไฟฟ้าที่รองรับ: 1.5V – 36V
  • ที่แรงดัน 12V อุณหภูมิ 25°C ไม่มีอุปกรณ์ระบายความร้อนเพิ่มเติม: กระแสสูงสุด <15A (ผ่านการทดสอบต่อเนื่อง 15A นาน 30 นาที)
  • รองรับกระแสไฟฟ้าต่อเนื่องได้สูงสุดถึง 30A (ผ่านการทดสอบต่อเนื่อง 30A นาน 30 นาที)
  • การสูญเสียพลังงานต่ำมาก แม้ในระดับกระแสสูงกว่า 50A
  • กระแสสแตนด์บาย: 0mA (ไม่มีการสูญเสียพลังงานเมื่อไม่มีโหลดหรืออยู่ในโหมดสลีป)

 

Product Introduction
The XL74610L Ideal Diode Module serves as an ideal diode rectifier to replace the XL74610 solution. It offers the same high-performance advantages without requiring polarity referencing. Equipped with two low-resistance PMOS transistors, it supports a maximum operating current of up to 10A, generating less heat and reducing power loss. Compared to conventional Schottky diodes, it can cut losses by up to 3W. Testing shows that after replacing with the XL74610L ideal diode, the temperature can drop by more than ten degrees, the voltage drop is around 50mV, and the package remains compatible.

Product Parameters

  • Operating Voltage: 1.5V – 36V
  • At 12V, 25°C, with no additional heat dissipation: peak current <15A (tested continuously at 15A for 30 minutes)
  • Supports a maximum continuous current of up to 30A (tested continuously at 30A for 30 minutes)
  • Theoretical power loss remains minimal even above 50A
  • Standby Current: 0mA (no loss, 0mA consumption in load-off sleep mode)
Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,072,435 view(s)
Visitors1,333,161 time(s)
Last updatedSep 6, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
600
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me