Information
Item weight
Barcode
Created time
Last updated on
Item description
บอร์ด ESP32-DevKitC ESP32-WROVER with PSRAM 8MB พอร์ต USB Type-C
 
Features
1.ESP32-DevKitC development board, the new version of the mainstream TYPE-C interface, the backplane can be equipped with ESP32 modules: ESP-WROOM-32,ESP-WROOM-32D,ESP-WROOM-32U, ESP32-WROVER.
2.ESP32-DevKitC is an entry-level ESP32 development board with integrated ESP32 pins pinned out for easy connection and use. It can be used to evaluate the full range of ESP32 modules and chips, and can be easily plugged into a breadboard.
3.ESP32-DevKitC is a small development board based on ESP32 modules, supporting Wi-Fi and Bluetooth functions. The board has a rich set of peripherals, so users can easily realize product development.
4.The on-board LDOs are led out to supply power for external components.ESP32-DevKitC groups different peripheral interfaces to help users get started with product development easily.
5. The ESP32-DevKitC has excellent RF performance, allowing users to design and develop applications without having to consider RF and antenna design. The basic system requirements are already included on the development board, so users only need to connect the USB cable for development.
 
Specification
ESP32-DevKitC development board:
ESP32 based module
EN: Reset button.
Boot: Download button. Press and hold the Boot key, and press the EN key at the same time (do not release the Boot key at this time) to enter the "Firmware Download" mode and download the firmware through the serial port.
USB-to-UART Bridge: Single chip USB-UART bridge that provides up to 3 Mbps transfer rate.
Interface: TYPE-C connector that can be used as a power supply for the board or as a communication interface between the PC and the ESP32-WROOM-32 module.
Communication: 2.4 GHz Wi-Fi + Bluetooth
Processor: high-performance Xtensa@32-bit LX6 dual-core processor with ultra-low power co-processor.
Multiple peripherals: Optimal power performance, RF performance, stability, versatility and reliability for various application scenarios and power requirements.
The board can be powered by one of the following three power supply options:
TYPE-C connector power supply (default)
5V/GND pin supply
3V3/GND pin supply
Dimension: 54.4*27.9mm


ESP32-WROVER
Supply Voltage: 2.3V ~ 3.6V
Frequency: 2.4 GHz ~ 2.5 GHz
Mounting Type : SMT
Data Rate: 150Mbps
Protocol: 802.11b/g/n
Storage Capacity: 4MB
Wi-Fi Protocol: 802.11 b/g/n (802.11n with speed up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs protection interval support
Operating channel center frequency range: 2412 ~ 2484 MHz
Bluetooth protocol: Compliant with Bluetooth V4.2 BR/EDR and Low Power Bluetooth standards
RF: NZIF receiver with -97 dBm sensitivity
Class-1, Class-2 and Class-3 transmitters; AFH
Module interfaces: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, Pulse Counter, GPIO, Capacitive Touch Sensor, ADC, DAC, TWAI® (ISO 11898-1 protocol compliant, i.e. CAN specification 2.0)
On-chip sensors: Hall sensors
Integrated crystal: 40 MHz crystal
Integrated SPI flash: 4 MB
Integrated PSRAM: 8 MB
Operating voltage/supply voltage: 2.3 V ~ 3.6 V
Operating Current: Average: 80 mA
Minimum supply current: 500 mA
Recommended operating temperature -40 °C ~ 85 °C
Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,074,972 view(s)
Visitors1,335,698 time(s)
Last updatedSep 11, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
601
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me