Information
Item weight
Barcode
Created time
Last updated on
Item description
โมดูล CAN bus MCU-230 bus transceiver SN65HVD230 CAN communication module

Main features and pin functions
SN65HVD230 can be used in higher interference environments.

The device has good receiving and sending capabilities at different speeds, and its main features are as follows:

Fully compatible with ISO11898 standard;
High input impedance, allowing 120 nodes;
Low current waiting mode, typical current is 370μA;
The signal transmission rate can reach 1Mb/s;
With thermal protection, open circuit failure protection function;
It has the function of resisting instantaneous interference and protecting the bus;
Slope control to reduce radio frequency interference (RFI);

The differential receiver has the ability to resist a wide range of common mode interference and electromagnetic interference (EMI).

Working mode and control logic
SN65HVD230 has 3 different working modes: high speed, slope and waiting. Its working mode control can be realized through the Rs control pin. Figure 2 is a typical application diagram of SN65HVD230 in CAN bus system. It can be seen from the figure that the output pin Tx of the CAN controller is connected to the data input terminal D of the SN65HVD230, and the data sent by this CAN node can be transmitted to the CAN network; while the receiving pins of the CAN controller Rx and SN65HVD230 The data output terminal R is connected to receive data. The SN65HVD230 mode selection port Rs is connected to a slope resistor grounded at one end through a jumper, and three working modes can be selected through hardware. Among them, the slope resistor is a potentiometer of 0-100kΩ.
โมดูล CAN bus MCU-230 bus transceiver SN65HVD230 CAN communication module
โมดูล CAN bus MCU-230 bus transceiver SN65HVD230 CAN communication module
โมดูล CAN bus MCU-230 bus transceiver SN65HVD230 CAN communication module
Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,091,329 view(s)
Visitors1,352,055 time(s)
Last updatedOct 12, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
602
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me