Information
Item weight
Barcode
Created time
Last updated on
Item description
Real-time timer relay and clock synchronization time control delay 24H time 5 time intervals
 
Product Highlights:
 
Wide voltage power supply 5.0V ~ 60V ;

A mode for multiple time periods, can reach 5 time periods ;
 
With buzzer alarm function .
 

Introduction mode:
 
OPE: Time Relay Close Point, CLE: Time Relay Point
 
Duration: PE-1 ~ PE-5 5 time periods (OPE TO CLE is a time)
 
 
----: Protection function

P-1: The relay closes or outputs pulses day to the OPE time point, and the relay closes or outputs pulses to the CLE time point.
 
P-2: Set day to OPE time point when relay closes or output PULSE, TO CLE time point when relay disconnect/or pulse output.
 
P-3: Set the date month to the OPE time point when the relay closes or output pulse, to the CLE time point when the relay closes or output pulse.
 
P-4: Set Date 1 to Day 2, Start Daily at OPE Time Point, End to CLE Time Point, Relay Action or Pulse Output.
 
P-5: Same as P-4, only the month cannot be set.
 
 
First, how to set?
 
In the time To Run interface, press the down button while:
 
Step 1: Select time range: PE-1 ~ PE-5 Press UP and DOWN select;
 
Step 2: Press the SET key to select the mode: P-1~P-5 (to set the corresponding time interval mode) by pressing the UP and DOWN buttons ("----" means block this time).
 
Note: Each interval can be repeated from "----", P-1 ~ P-5 one optional; For example, you can let five time periods work at the same time in P-1 mode, or let duration 1 in P-1 mode, duration 2 in P-2 mode and so on.
 
Step 3: After the selection mode is finished, press the SET key to enter the interval setting interface, set the interface in the duration, press the key SET parameter switch "OPE" to start the point, "CLE" end Point "Dae" date;
 
Step 4: After setting the parameters to exit the settings, press the SET button for 2 seconds, release will automatically check whether the parameter settings are legal, legal save parameters, return time to run the interface. C; If the parameter is wrong, "ERR" reminds (such as stop or date <= start or date), return to the parameter setting interface;
 
Additional features: 

Each "Time period" can be set separately.
 
In the specific interface parameter settings (after a second step), press the STOP button, output mode:
 
OUT1: start relay open point, end time relay close
 
OUT2: 1S output, start or end pulse
 
In the specific interface parameter settings (after a second step), press the STOP button for a while to change the sound mode:
 
BLL0: Closed ring
 
BLL1: Activate ring
 
Note: When the bell rings, press the button to stop ringing.
 
 
Stop the expansion key function:
 
Relay enable mode:
 
1.: Activate the relay;
 
2. Off: relay does not open, always closes;
 
Press the STOP button on the display interface between ON and OFF, the current status will flash, and then return to the main interface. (Emergency stop function, press off to close the relay)
 
After the relay is disabled, the product can be used as an alarm.
 
 
Sleep MODE:
 
1. CP Sleep MODE: within 5 minutes of any operation, the digital tube automatically turns off the display, normal work program;
 
2. OD normal mode: digital tube always open;
 
Press the STOP button for a while, after 2 seconds release, to achieve the CP and OD of the switch, the current state will flash, and then return to the main interface.
Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,073,369 view(s)
Visitors1,334,095 time(s)
Last updatedSep 8, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
601
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me