Information
Item weight
Barcode
Created time
Last updated on
Item description

Description:
This module is the 16 way IO extension module of the 12C interface, and built in the MCP23017 chip of MicroChip. The function of the chip is complete. Each IO can be arbitrarily configured as input or output, and a pull up resistor can be set, and the interrupt function can be enabled for the IO configured as input. The IO interface has a strong driving capacity, and the current and current can reach 25mA.
    MCP23017 is a high-speed IIC interface. It supports the IIC frequency of 100KHz, 400KHz and 1.7MHz. The chip has 3 address pins, which can be set up for 8 different addresses. So 8 modules can be connected through two IIC buses to achieve up to 128 IO extensions.
    This module is flexible in configuration and strong in driving ability. There are many parallel connections.

Parameters:

No. Parameter Value
1 Operating voltage 3.0V-5.5V
2 Drive chip MCP23017
3 Number of IO 16 (input, output, interruption)
4 Drive power supply 25mA1
5 12C frequency 100KHz, 400KHz, 1.7MHz
6 working temperature -40 Celsius -125  Celsius
7 Chip level Industrial grade
8 Parallel multiple Up to 8
9 Driver 51 and Arduino
10 Module size 65mm*19mm


Pin Description:

No. Pin Function Function
1 VCC Power source input 3.0V-5.5V
2 GND Power negative electrode 0V
3 SCL 12C clock line SCL connecting single chip IO pin or MCU 12C interface
4 SDA 12C data line SDA connecting single chip IO pin or MCU 12C interface
5 RST Chip reduction Low level effective, connecting MCU IO pin or unconnected
6 ITA GPIOA port interrupt output Connect MCU IO pin, without connection when interruption
7 ITB GPIOB port interrupt output Connect MCU IO pin, without connection when interruption


Packing List:

No. Component Quantity Unit
1 STC15W408AS MSP 1 Piece
2 Double row straight pin 2*7 Pin
3 Double row Bending pin 2*7 Pin
4 Single row straight pin 1*20 Pin
5 Single row Bending pin 1*20 Pin

Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,076,472 view(s)
Visitors1,337,198 time(s)
Last updatedSep 13, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
601
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me