Information
Item weight
Barcode
Created time
Last updated on
Item description
Introduction
     TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 arduino stepper motor driver has a wide range power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors. 
     The stepper driver supports speed and direction control. You can set its micro step and output current with 6 DIP switch. There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability. 
As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.
 
ตัวอย่างการต่อกับ Arduino UNO




ตัวอย่าง Code TB6600 ต่อคู่กับ Arduino UNO 

s2nen.com/ดูบทความ-41054-การใช้งาน-stepper-motor-กับ-control-drive-tb6600-arduino.html





Features
Support 8 kinds of current control
Support 7 kinds of micro steps adjustable
The interface adopts high-speed optocoupler isolation
Automatic semi-flow to reduce heat
Large area heat sink
Anti-high-frequency interference ability
Input anti-reverse protection
Overheat, over current and short circuit protection

Specification
Input Current: 0~5A
Output Current: 0.5~4.0A
Control Signal 3.3~24V
Power (MAX): 160W
Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
Temperature: -10~45℃
Humidity: No Condensation
Weight: 0.2 kg
Dimension: 96 * 71 * 37 mm
 
*


Electrical environment:

cooling method Natural cooling or forced air cooling.
 occasion
Can not be placed next to other heating equipment, to avoid dust, oil, corrosive gases, high humidity and strong earthquake sites,
Combustible gas and conductive dust are prohibited.
 humidity  40-90%RH
 shock  10-55Hz/0.15mm
 Storage temperature  -20-65℃
 weight 0.15kg 
 
 
Subdivision setting:

     Use S1, S2, S3 three-position dial switch to set subdivision (pulse), as shown in the following table:

Segmentation  Pulse number / circle  S1  S2  S3
 NC  NC  ON  ON  ON
 1  200  ON  ON  OFF
 2/A  400  ON  OFF  ON
 2/B  400  OFF  ON  ON
 4  800  ON  OFF  OFF
 8  1600  OFF  ON  OFF
 16  3200  OFF  OFF  ON
 32  6400  OFF  OFF  OFF

 

Operating current setting

     Use S4, S5, S6 three-position dial switch to set the output operating current, as shown in the following table:


Average current  Peak current  S4  S5  S6
 0.5A  0.7A  ON  ON  ON
 1.0A  1.2A  ON  OFF  ON
 1.5A  1.7A  ON  ON  OFF
 2.0A  2.2A  ON  OFF  OFF
 2.5A  2.7A  OFF  ON  ON
 2.8A  2.9A  OFF  OFF  ON
 3.0A  3.2A  OFF  ON  OFF
 3.5A  4.0A  OFF  OFF  OFF

Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,072,665 view(s)
Visitors1,333,391 time(s)
Last updatedSep 6, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
600
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me