Information
Item weight
Barcode
Created time
Last updated on
Item description
วิดิโอแนะนำการใช้งาน



Description:
 
This module is used when it is necessary to isolate the control in actual work and
voltage conversion.
 
It can realize 3.3V or 5V control 3.3---30V voltage level interface, after the control
terminal input high level is turned on, the controlled terminal will also conduct to
the ground, and the port changes from the original high level to the low level. For
the friend of the single-chip or PLC, it is only necessary to judge when the output
port is low.
 
The photoelectric isolation has strong anti-interference ability, and the
combination control of many different devices can be realized later, such as triode,
MOS tube, and small power relay module.
 
If it is a pulse signal, please note that the limit of 817 is below 3KHZ. If the control
signal is greater than 3KHZ, please do not use this module, it will not work properly.
 
 
Parameter:
 
1, the drive terminal signal voltage: 3.3-24V
 
2, the output voltage range: 3.3-30V (output current depends on the specific
situation, but the maximum is not 10MA, the total power is certain, the voltage and
current are inversely proportional)
 
3, through the jumper cap can achieve whether the output is high potential output
or low output.
 
4, the board above 2 / 4 817 are independent, can achieve simultaneous control of
different voltages, etc.
 
5: board size: length: 48mm; width: 38mm; long side hole distance: 42mm; wide
side hole distance: 32mm







Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,073,164 view(s)
Visitors1,333,890 time(s)
Last updatedSep 7, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
600
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me