Information
Item weight
Barcode
Created time
Last updated on
Item description



A PCF8591 AD / DA chip introduced
    PCF8591 is a monolithic , single supply, low power ,8-bit CMOS data acquisition device . PCF8591 has four analog inputs, one analog output and a serial I2C bus interface . PCF8591 the three address pins A0, A1 and A2 can be used for programming the hardware address , allowing access to the same I2C- bus PCF8591 8 devices without the need for additional hardware. PCF8591 device on the input and output address, control and data signals are bi-directional two-wire I2C-bus for transmission in a serial manner .
 
PCF8591 key performance indicators:
  •   single power supply
  •   PCF8591 operating voltage range of 2.5V-6V
  •   Low Standby Current
  •   via I2C -bus serial input / output
  •   PCF8591 through 3 hardware address pins addressing
  •   PCF8591 I2C bus speed sampling rate decision
  •   4 analog inputs programmable as single-ended or differential inputs
  •   auto increment channel selection
  •   PCF8591 analog voltage range from VSS to VDD
  •   PCF8591 built-in track and hold circuit
  •   8-bit successive approximation A / D converter
  •  Through an analog output of the DAC gain
 
Two baby description
  •  A module chip PCF8951
  •  2 module supports an external 4-channel voltage input capture ( voltage input range 0-5v)
  •  3 module integration photoresistor , you can capture the ambient light intensity through the AD precise values
  •  4 module integrated thermistor temperature by exact numerical AD acquisition
  •  5 module integrates a channel 0-5V voltage input capture ( via the blue potentiometer adjustment input voltage )
  •  6 module with power indicator ( the module after power indicator lights )
  •  7 module with DA output indicator , when the module DA output interface voltage reaches a certain value , the board will be lit DA output indicator, the higher the voltage , the light intensity is more obvious ;
  •  8 Module PCB size : 3.6cm * 2.3cm
  •  9 standard double panel , thickness 1.6mm, nice layout , surrounded by a through hole , aperture : 3mm, convenient fixed
 
Three module interface description
This module expansion outside the left and right , respectively, 2-way pin header , respectively, as follows:
  DA output interface chip left AOUT
       AINO chip analog inputs 0
       AIN1 chip analog inputs 1
       AIN2 chip analog inputs 2
       AIN3 chip analog input interface 3
  Right SCL IIC clock interface connected microcontroller IO port
       SDA IIC digital interface connected microcontroller IO port
       GND Module to external ground
       VCC Power Interface External 3.3v-5v
 



Four modules use red short cap
  There are three red module shorted cap, respectively function as follows :
  •   Connect the shorting cap P4 P4 , select thermistor access circuit
  •   Connect the shorting cap P5 P5 , select photoresistor access circuit
  •   Connect the shorting cap P6 P6 , select 0-5V Adjustable voltage access circuit
Conditions
Tags

Exchange or return policy



Every item comes with a 30-day warranty. However, there are certain conditions that apply:

  1. The customer should not be responsible for any self-inflicted damage, such as incorrect power connections (for example, supplying 5V instead of the required 3.3V for a sensor).

  2. The product must be in perfect condition, without any breakage or damage caused by electricity (e.g., short circuits leading to electrical fires).

  3. The store does not accept product exchanges due to customer misunderstandings, such as purchasing the wrong size for their project or buying something without eventually using it. Customers can inquire about the product details and ensure compatibility before making a purchase by contacting us through our Line account @modulemore during business hours. Please note that there may be delays in response between 12:00 PM and 2:00 PM.

Return Policy: To initiate a product return, customers must provide the original receipt or a copy for quick verification. Returns can be sent to our store address by following these guidelines:

  1. Provide a detailed description of the damaged item(s).
  2. Mention any tests or experiments conducted by the customer.

Please note that the store reserves the right to make the final decision regarding product replacement or refund.

English

Categories

TRACK & TRACE

*Enter your order ID or email used in placing an order

OVERVIEW

Pageviews2,072,905 view(s)
Visitors1,333,631 time(s)
Last updatedSep 7, 2025

JOIN US

ร้านModuleMore
ร้านModuleMore
/www.modulemore.com/en
Join as a Member
600
Become a member of this store to receive special offers and promotions
Choose your language
Language
Currency
Change
Modify language
My orders
This seller's information
ร้านModuleMore
ModuleMore
Arduino compatible board, Iot, ESP32, ESP8266, Nodemcu, Raspberry pi, micro:bit and etc.
Mobile number : 0831710868
E-mail : paheyisoicus@gmail.com
Send message to seller
About this seller
Recently viewed items
Favourite this seller
Join as a Member
Share this page
Share this page

TOP Back to top
Contact me